A boiler thermostat with a cloud and offline operation

Boiler control — from your phone and browser

Thermotema watches your home temperature and runs the boiler through an ESP32 board: thermostat, intervals, schedules and flexible IF–THEN rules with weather forecast. Charts, statistics and e-mails on the site and your phone — and the board copes on its own without internet.

  • Works offline
  • HTTPS link
  • One-year history
  • Voice via Alice

What Thermotema does

🌡️

Thermostat and intervals

Keeps the set temperature with hysteresis by the room sensor; interval mode runs the boiler N minutes every M minutes.

🗓️

Schedules

Half-hour slots by weekdays and months: “for 40 minutes” or “until +60 °C in the sauna”. Schedules are stored on the board too.

🧠

Flexible IF–THEN logic

Your own rules from sensor, time and 12-hour weather forecast conditions: turn on, turn off, log, send an e-mail.

📶

Offline — no panic

The board at the boiler is in charge. If the link drops, thermostat, intervals and schedules keep working; the log is uploaded later.

🗣️

Yandex Alice

“Alice, set 23 degrees”, “Alice, what is the temperature at home?” — via the smart home skill.

📈

Charts and statistics

Charts for three sensors, boiler run time by hours and months, CSV export; history is kept for up to a year.

✉️

Notifications

An e-mail when a rule fires: freezing, overheating, boiler did not start. The event log is on the device card.

🛡️

Protection and security

Emergency shutdown on coolant overheating, shutdown on sensor failure, brute-force protected sign-in, HTTPS exchange.

How it works

Phone cabinet and app Thermotema server rules, history, e-mails Thermostat (board) by the boiler Boiler heating Sensors T1 · T2 · T3 control and settings charts and stats decisions and settings readings and status relay: on/off temperatures

Server

The website keeps the temperature history, runs your flexible IF–THEN rules and watches the weather forecast; event e-mails arrive in your inbox.

Boiler-side board

The ESP32 board polls the sensors and holds the setpoint on its own — even if the connection to the server drops.

Your phone

The cabinet works in the browser and as an app: mode, setpoint, charts and statistics — always at hand.

Your home, watched over all year round

Warm house
Warm houseA comfy +22 inside at minus thirty outside. The board keeps the warmth until you arrive and warns you if anything goes wrong.
Bathhouse ready by evening
Bathhouse ready by eveningThe bathhouse warms itself to the scheduled hour — a rule like “IF Friday 17:00 THEN heat the bathhouse”. Come in: everything is ready.
Boiler and thermostat under control
Boiler and thermostat under controlA gas boiler, pipes and a wall thermostat in one boiler room: the board reads coolant and room temperatures itself and decides when to fire the boiler.
Underfloor heating and modern radiators
Underfloor heating and modern radiatorsWater underfloor heating and designer radiators run on the same automation: schedules, flexible logic (with the weather forecast) or the thermostat.
All year round
All year roundThe clock ticks and the seasons change — schedules keep the home warm in winter and leave it alone in summer.

If the internet goes down

  1. The board keeps workingThermostat, intervals, manual modes and schedules run on the board itself — the boiler is never left unmanaged.
  2. The log builds up on the boardSensor temperatures, boiler state and all events are stored in the board memory — up to 1200 records, surviving a reboot.
  3. Back online — history on the siteThe board uploads what it collected: no gaps on the chart or in the log for the outage.

Inside the device

ESP32 control board Sensors T1 / T2 / T3 Relay power relay Boiler burn on/off Display (OLED) temperature and mode Wi-Fi server link Bluetooth setup from phone temperatures on/off readings server polls setup

Questions and answers

Which boiler fits?

Any boiler with a room thermostat input (dry contact): gas, electric, solid fuel with automation. The board closes this contact via a relay.

What do I need to connect?

A Thermotema board with a serial number, home Wi-Fi and a phone. Sign up with the serial number; the token is entered on the board over Bluetooth.

What if the internet or power goes out?

Without internet the board runs the boiler itself and keeps a log. After a power cut it starts with the saved settings.

How long is data kept?

Readings, events and login history — up to a year (set by the administrator), then deleted automatically.

Can I control it without an app?

Yes: the site works in any browser, has a mobile version and a home-screen app. At home you can also use the board local page.

See how it looks

The demo account shows sample data — real devices appear after registering with a serial number.